Pro-Secure SR1 Swing Gates
Pro-Secure SR1 swing gates – product overview
Pro-Secure SR1 swing gates are available as single-leaf and double-leaf designs in a range of widths and heights for pedestrian or vehicular access. There is also a choice of manual or powered/automated operation, plus we can supply and install various access control systems.
Swing gates normally cost less than comparable sliding gates and are often operated manually – which therefore saves the cost of gate automation. Furthermore, unlike ordinary swing gates, our Pro-Secure SR1 swing gates are independently certified as providing enhanced security. The SR1 security rating enables specifiers to demonstrate that they have performed due diligence in securing the site perimeter, which can be very helpful for projects required to be Secured by Design.
Our skilled installation teams normally complete the work in one day, which minimises disruption at the site being secured. This is the case even when we are installing, commissioning and CE marking powered/automated gates.
|Security rating:||LPCB standard LPS 1175 Issue 8.0 Security Rating SR1|
|Heights:||1.8 m to 3.6 m|
|Opening widths:||1.2 m to 5.0 m (single leaf) 2.0 m to 10.0 m (double leaf)|
|Cladding:||868 welded wire mesh, wire diameter 6 & 8mm, mesh size 200 mm x 50 mm|
|Materials of construction:||Steel|
|Latch:||As standard, sliding latch will be provided with an appropriate approved for heavy-duty padlock, but contact us with your requirements.|
|Finish:||Hot-dip galvanising with optional polyester powder coating in black, green or other RAL colours on request|
|Compliance:||Powered and automatic gates comply with relevant safety standards and are CE Marked to the Machinery Directive|
|Access control system:||Contact us to discuss options|
|Guarantee:||The system comes with 12 months warranty|
|Maintenance||Maintenance programmes are available which reduces the chances of equipment failure and any health and safety issues.|
What are the key features of Pro-Secure SR1 swing gates?
Pro-Secure SR1 swing gates are manufactured entirely from steel and provide good security thanks to their resistance to cutting and climbing. By paying careful attention to the design and manufacture of these gates, we ensure they meet the high standards necessary for achieving an SR1 security rating. For example, hinge protection plates are installed, and the latch areas are reinforced.
Each gate leaf features a robust framework fabricated from RHS (rectangular hollow section) steel, braced as necessary. Heavy-duty 868 wire mesh is fully welded into the frame. This mesh provides a good balance between high security and clear visibility for CCTV and security patrols.
Gate leaves and gate posts are hot-dip galvanised for long-lasting resistance to corrosion and we can optionally apply a tough polyester powder coat on top of the galvanising for further protection and improved aesthetics; standard colours are black and green, or we can apply almost any other RAL colour on request. Finishes are applied in accordance with these standards:
- BS EN ISO 1461 (Hot dip galvanized coatings on fabricated iron and steel articles – Specifications and test methods)
- BS EN 13438 (Paints and varnishes – Powder organic coatings for hot-dip galvanised or sherardized steel products for construction purposes)
With their robust construction and anti-corrosion finish, Pro-Secure SR1 swing gates require little or no maintenance over their long lifetime. The main exception is that automated or powered gates need periodic inspections to ensure they continue to operate safely and reliably. In any event, we offer maintenance contracts or, if the gate suffers damage during use, we can undertake repairs on-site or at our factory.
Procter Contracts is a department of Procter Bros Ltd, a family-owned and run company that can trace its roots back to 1740. We have been in the perimeter security market for over 100 years and have built up a reputation for the high quality of our products and exceptional standards of customer service. As a result, you can be certain that we have the knowledge and experience to meet your requirements for SR1 security-rated swing gates.
We only use our own teams of trained installers, not casual labour, so we can guarantee the quality of the installation. Procter Contracts has the following accreditations:
- Secured by Design accredited installer of fencing and gates
- dhf (Door and Hardware Federation) Safety Assured installer for powered and automatic gates
- Gate Safe Aware Installer for powered and automatic gates
- Full Member of PSSA (Perimeter Security Suppliers Association)
- In addition, we hold a number of accreditations for working on-site as a contractor.
Find out more
To learn more about Pro-Secure SR1 single or double swing gates, download our literature or contact us to discuss specific projects.
Other types of security-rated gate
Pro-Secure SR1 swing gates are suitable for many different requirements and we offer further types of security rated gates for other applications. Follow the links to learn about our Pro-Secure SR1 sliding gates or, if greater security is necessary, our SR2 swing gates or SR2 sliding gates.