One-way Flow Plates

Home > Products > Barriers > One-way Flow Plates
One-way flow plates
Control traffic in and out where traffic must travel in one direction only

Our one-way flow plate solves the problem of controlling traffic in and out of car parks or around sites where traffic must travel in one direction only. Installed in groups, typically six per 3 m wide roadway, the robust flow plates are pushed down as a vehicle passes over in the correct direction, then the weighted plates flip back up after the vehicle has passed. However, if a vehicle attempts to pass in the wrong direction, the flow plates do not deflect out of the way. One-way flow plates are therefore extremely effective at enforcing traffic flows.

One-way flow plates are manufactured from steel, galvanised to provide protection from corrosion, and finished with a tough, high-visibility yellow paint. A heavy-duty rubber buffer on the reverse of the plate minimises noise.

Enquire or call 0800 2944177

  • One way flow plates

Sets of one-way flow plates are installed by casting in concrete and we recommend that they are used in conjunction with speed ramps and warning signs. They are not suitable for use where HGVs are present.

Key Features

  • All fabrication of galvanised steel construction
  • Top plates are painted finish
  • Heavy-duty rubber buffer
  • Ragged for casting in only

Specification

Heavy duty steel box 300x200x200mm deep
Flap and top of heavy duty steel plate 12.5mm thick
Heavy duty hinge diameter 19mm
Total weight 15kg

Additional information

  • It is recommended that One-Way Plates are used in conjunction with speed ramps.
  • Not suitable for HGV use.
  • It is strongly recommended that signs warning of the use of One-Way Flow Plates are used.

Request a quote
or call us on 0800 2944177